Which hangar to use for RB Y-pipe
Which hangar to use for RB Y-pipe
Which hangar do I use? the O or the 8?
<a target='_blank' title='ImageShack - Image And Video Hosting' href='http://img837.imageshack.us/i/71307087.png/'><img src='http://img837.imageshack.us/img837/3732/71307087.png' border='0'/></a> Uploaded with <a target='_blank' href='http://imageshack.us'>ImageShack.us</a>
how would i put it on the chassis hangar? looks kind of confusing lol
wtf is that picture right? lol...
<a target='_blank' title='ImageShack - Image And Video Hosting' href='http://img837.imageshack.us/i/71307087.png/'><img src='http://img837.imageshack.us/img837/3732/71307087.png' border='0'/></a> Uploaded with <a target='_blank' href='http://imageshack.us'>ImageShack.us</a>
how would i put it on the chassis hangar? looks kind of confusing lol
wtf is that picture right? lol...
Depends.... There are a few version of racing beat exhaust. Most definetly they all use the "8" shaped one which bolts onto the Y-pipe and goes on the two hangers located on the rear subframe. ("B" in RB diagram below).
However, if your RB exhaust y-pipe also has the two "hangers" right where the y-pipe meets the catalytic coverter/pre-silencer you need the donought style ones too. These attach to the frame rail hangers on the left and right hand side of the chassis ("A" in the RB Diagram below).
http://www.racingbeat.com/resultset....rtNumber=16454
However, if your RB exhaust y-pipe also has the two "hangers" right where the y-pipe meets the catalytic coverter/pre-silencer you need the donought style ones too. These attach to the frame rail hangers on the left and right hand side of the chassis ("A" in the RB Diagram below).
http://www.racingbeat.com/resultset....rtNumber=16454
Depends.... There are a few version of racing beat exhaust. Most definetly they all use the "8" shaped one which bolts onto the Y-pipe and goes on the two hangers located on the rear subframe. ("B" in RB diagram below).
However, if your RB exhaust y-pipe also has the two "hangers" right where the y-pipe meets the catalytic coverter/pre-silencer you need the donought style ones too. These attach to the frame rail hangers on the left and right hand side of the chassis ("A" in the RB Diagram below).
http://www.racingbeat.com/resultset....rtNumber=16454
However, if your RB exhaust y-pipe also has the two "hangers" right where the y-pipe meets the catalytic coverter/pre-silencer you need the donought style ones too. These attach to the frame rail hangers on the left and right hand side of the chassis ("A" in the RB Diagram below).
http://www.racingbeat.com/resultset....rtNumber=16454
THANKS! just what i needed. jacks ftw!
