Ground Wire???
#1
Full Member
Thread Starter
Join Date: Aug 2004
Location: NEW ZEALAND
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Ground Wire???
I have just put a manual gearbox in my 7 and it has a black wire attached to the top of the bell housing, it has been cut and im really unsure wear it goes.
I have checked the FAQ's and the FSM, bit confused.
I thought it could be a ground wire?
Cheers
I have checked the FAQ's and the FSM, bit confused.
I thought it could be a ground wire?
Cheers
#2
Former Moderator. RIP Icemark.
Yes, that is a ground to the firewall.
Helps reduce static electrical charges in the driveline, as well as provides a back up ground for the engine.
Helps reduce static electrical charges in the driveline, as well as provides a back up ground for the engine.
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 109 Likes
on
92 Posts
What is on the other end of the wire? A small black box? If so, then that's the condensor for the oil pressure sender. There should be a wire in the harness around the slave cylinder area that matches up. CHeck the FSM for the proper wire colour.
#4
Former Moderator. RIP Icemark.
Originally Posted by Aaron Cake
What is on the other end of the wire? A small black box? If so, then that's the condensor for the oil pressure sender. There should be a wire in the harness around the slave cylinder area that matches up. CHeck the FSM for the proper wire colour.
Small gauge wire: coming off a condensor is the oil pressure gauges senders condensor, and does not ground but rather "T"s into the oil pressure gauge wire.
Large gauge wire: Ground
#5
Rotary Enthusiast
Join Date: May 2005
Location: Vernon, BC
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
following up on this grounding.... ive noticed somethign during my rebuild..
there is a large ground that is connected tot eh rats nest near the fuel filter, but its a black and white wire. I always though black and YELLOW was ground, and black and white was 12v
there is a large ground that is connected tot eh rats nest near the fuel filter, but its a black and white wire. I always though black and YELLOW was ground, and black and white was 12v
#7
Former Moderator. RIP Icemark.
Originally Posted by jono20
following up on this grounding.... ive noticed somethign during my rebuild..
there is a large ground that is connected tot eh rats nest near the fuel filter, but its a black and white wire. I always though black and YELLOW was ground, and black and white was 12v
there is a large ground that is connected tot eh rats nest near the fuel filter, but its a black and white wire. I always though black and YELLOW was ground, and black and white was 12v
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM