Ground Questions
#1
Full Member
Thread Starter
Join Date: Nov 2004
Location: california
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Ground Questions
k im trying to redo my ground in my car cause i got some major hesitation issues. can anyone send me a link on where the proper places to put the new ground cable. i will apreciate it a lot.
#3
Rotary Enthusiast
iTrader: (1)
Try the 2nd Gen Achives section. Couple write-ups there for grounding. I changed these to date and saw some improvement, but not as much as I hoped for. My inside lights and door lights work now, and it starts easier:
1. #4 gage ground from Battery-Strut Tower
2. #2 gage Battery (-) to rear of engine (the removed old (-) battery cable)
3. #8 gage mounted on engine behind manifold to firewall near wiper ***'y
4. Replaced the 'condensor' wire (the one with a little black box mounted on the slave cylinder). It got rid of idle fluctuation for me-old one got loose and frayed.
1. #4 gage ground from Battery-Strut Tower
2. #2 gage Battery (-) to rear of engine (the removed old (-) battery cable)
3. #8 gage mounted on engine behind manifold to firewall near wiper ***'y
4. Replaced the 'condensor' wire (the one with a little black box mounted on the slave cylinder). It got rid of idle fluctuation for me-old one got loose and frayed.
#4
Try this link I used it to help groung my 7 https://www.rx7club.com/forum/showth...5&pagenumber=1
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM