Hi I have an 87 t2 and I just got a greddy turbo timer and harness. I see how they connect to each other and have done so however the instructions are in jap and I was wondering what the other wires are for and where I connect the harness too?? Does anyone have a walk through or can tell me where to connect it and what the addit wires are for. Thank you.

 

http://greddy.com/tech/FATURBO_TIMER.pdf

 

thanks that was helpful

 

ok I hooked up everything and it doesnt work. I did hook up the parking brake or the spedo wires. Do those have to be set up? Do we work with one or two wires connected tot he parking brake?? If so which one do I tap(I lost my multimeter so i cant test it) Also does anyone have an electical diagram for the ignition harness for the s4 t2?? Help me please guys

 

Speedo wire? I didnt look over the PDF but unless you TT has a function that is speed related I dont see what you would need to hook up. Anyways you need to tap into the ebrake wire which is in the center console where the alarm light and power mirror switch is if you have them. It's a red wire under the cover I believe.

 

cool. I do have those and yes the tt has two funtions one is that it reads the type of driving yoru doing and can adjust the time for cool down accordingly(I dont really need it) and the other will shut the car of should it move without the key in the ignition while the tt is still running(anti theft may hook that up later). But for now I just watn it to work. Ok so I will tap that ebrake wire tonight and see if that helps it to work. anybody got a wiring diagram for the the ignition??

 

well I hoooked up the parking brake wire and rewired it so now it works. I still havent hoooked up that speed sensor though. Im happy now though. It was a red wire wrapped with black plastic for the parking brake. My crappy chilton manual has these electrical diagrams but they are very hard to follow