I have searched on the forum. Read all the articles about the install and everyone seems some way or another to get the pipe that fits around the p/s pump to fit. Most I have seen seem to have had to mod one thing or another.
My question is, is there anyone out there that has gotten the pipe to fit, with out cutting it our adding an extra piece in. I am putting it on a 91 so I have the smaller p/s pump. I am getting interference from the p/s pump and the brake master cylinder. I am sure it is probably an easy install on the j-spec rx-7's because the brake master is on the other side but don't have a jspec. I saw i guess Iceman's car or his friends car use a rubber piece to make the bend but he also cut the pipe. I know there has to be someone out there that has gotten it to fit. I am thinking of fliping around the master cylinder's resivior tank but still not sure if that is going to help. Any pics out there, seen cyms fc but he doesn't have p/s. Any help would be great.

 

check pictures of few installs i have collected :

http://rx7cz.net/photos/intercooler/

 

Thanks hIGGI,
Gave me a much better and more confident idea of how I am going to hack away to get it installed. Thanks again, huge help.
Chris