Greddy FMIC install help????
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: reading, pa. usa
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Greddy FMIC install help????
I just purchased the new kit from greddy for my T2.....I need to know what to do with the 2 lines that went into the stock ic. (the one line frm the upper intake to the ic and the line from the accelerated warm up sol. valve to the ic) as of now i have them capped off and the accelerated warmup valve isn't on. The car will not stay running at idle.....please help.....i wanna get this damn thing done...thanks
#2
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Those are just for the fast idle and BAC valve. Not having them shouldn't affect the idle if everything is capped off. If you have a leak in your IC piping that would cause the stalling at idle. Maybe you popped something loose and didn't notice it?
#4
Junior Member
Thread Starter
Join Date: Mar 2001
Location: reading, pa. usa
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
piping is fine....i also removed my emissions controls stuff (acv) at the same time of the fmic install.. i just capped off the 3 lines that went to it.. is all that right? do i have to turn up the idle now
#5
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 1.3literv8eater
piping is fine....i also removed my emissions controls stuff (acv) at the same time of the fmic install.. i just capped off the 3 lines that went to it.. is all that right? do i have to turn up the idle now
piping is fine....i also removed my emissions controls stuff (acv) at the same time of the fmic install.. i just capped off the 3 lines that went to it.. is all that right? do i have to turn up the idle now
#6
Junior Member
Thread Starter
Join Date: Mar 2001
Location: reading, pa. usa
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
i found the two hoses that g into my tid were not in (oops)but i put them in and it still won't idle...im going to look around tomorrow see wha i can find let me know of any more ideas... would taking the emissions stuff off have anything to do with it
#7
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 1.3literv8eater
i found the two hoses that g into my tid were not in (oops)but i put them in and it still won't idle...im going to look around tomorrow see wha i can find let me know of any more ideas... would taking the emissions stuff off have anything to do with it
i found the two hoses that g into my tid were not in (oops)but i put them in and it still won't idle...im going to look around tomorrow see wha i can find let me know of any more ideas... would taking the emissions stuff off have anything to do with it
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Mar 2001
Location: reading, pa. usa
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
i turned up the idle a little bit and drove it around the block a little bit and whan i came back it would idle.... i heard a loud hissing sound and i foud it to be two things.. the bottom of the bac vale to the stock intercooler piping had to be capped and the old spot on the lower intake where the line went to the main cat... i plugged them and now it idles even better...... for now thanks for your help.....laterz
#9
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 1.3literv8eater
i turned up the idle a little bit and drove it around the block a little bit and whan i came back it would idle.... i heard a loud hissing sound and i foud it to be two things.. the bottom of the bac vale to the stock intercooler piping had to be capped and the old spot on the lower intake where the line went to the main cat... i plugged them and now it idles even better...... for now thanks for your help.....laterz
i turned up the idle a little bit and drove it around the block a little bit and whan i came back it would idle.... i heard a loud hissing sound and i foud it to be two things.. the bottom of the bac vale to the stock intercooler piping had to be capped and the old spot on the lower intake where the line went to the main cat... i plugged them and now it idles even better...... for now thanks for your help.....laterz
#11
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Flamin' NOS
PICS!!!! Must see pics of greddy intercooler!!!
PICS!!!! Must see pics of greddy intercooler!!!
#12
Junior Member
Thread Starter
Join Date: Mar 2001
Location: reading, pa. usa
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
i'll get some pics....this is one mean looking intercooler... it took me four months to get it. the core is 25 x13x 3....piping out of ic is 3 3/4.....thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM