gforce ecu?
11-02-01, 09:24 AM
#1
Rotary Enthusiast
Thread Starter
gforce ecu?
when you send your computer off to be reprogramed byu these guys what all do they do?
what kind of a horse power increase can you expect?
how far can you turn the boost up?
what do you do about fuel?
any info would be greatly appreciated
what kind of a horse power increase can you expect?
how far can you turn the boost up?
what do you do about fuel?
any info would be greatly appreciated
11-02-01, 11:52 AM
#2
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
I'm not even sure if they are around anymore, there website has been down for a while.
but it'll retard some timming at higher boost levers (important!!) and remove fuel cut so you don't need a FCD. as well as change your fuel mapping around abit. and could higher the rpm cut off limit if you want.
you could run aboub 12psi, I'd add a bigger fuel pump with it though too.
but it'll retard some timming at higher boost levers (important!!) and remove fuel cut so you don't need a FCD. as well as change your fuel mapping around abit. and could higher the rpm cut off limit if you want.
you could run aboub 12psi, I'd add a bigger fuel pump with it though too.
Thread
Thread Starter
Forum
Replies
Last Post
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM
