2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Getting injectors cleaned?

Thread Tools
 
Search this Thread
 
Old Mar 19, 2002 | 01:30 PM
  #1  
gottadrive's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 84
Likes: 0
From: Port Murray NJ
Getting injectors cleaned?

I have the flooding problem and recently put in a fuel pump kill switch, however I would still like to get the injectors cleaned. I was poking alittle around the engine and found a fuel rail and two injectors on the passenger side of the engine under the intake tubing. are these the primarys or secondaries? and where are the other 2?
Reply
Old Mar 19, 2002 | 02:08 PM
  #2  
rico05's Avatar
WTB S5 N/A FC
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 2,778
Likes: 0
From: College Station, Tx
Primary, I beleive. The secondaries should be just below those. Once you get em out, look for RC Enginering. They rebuild, clean, and blueprint em for $100 and change for all 4.
Reply
Old Mar 19, 2002 | 02:25 PM
  #3  
JohnL's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 91
Likes: 0
Those are the Secondary Fuel injectors on the Rail that you can see right below the intake tubing. The primary fuel injectors are below your throttle bodie, The primary injectors are mounted side by side, where as the secondary injectors are spaced apart from each other on the fuel rail that you can see. RC enginering does excellent work and very good service.
Reply




All times are GMT -5. The time now is 12:16 PM.