Gaskets
02-13-10, 11:17 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Virginia
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
Gaskets
Does anyone know where to get the exhaust manifold gasket and the turbo gasket that goes between the turbo and the manifold? Also, where to get the intake plenum gasket for an 89 TII? Advance auto charges $75 for a intake gasket and I can't see that being practical. Also, nobody seems to carry the exhaust gaskets.
02-14-10, 09:52 PM
#6
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Mazdatrix for exhaust gaskets.or the Dealer(big bucks)
I have done a couple exhaust pipe gaskets with the Sheet material(NOflame coating and thin steel sandwiched Type stuff)..just Ball peen hammer the surface and cut them to shape.I did the Upper manifold gaskets like that too.I paid like 15 bucks,and I ended up with alot of Material left over to make other Small gaskets,like the Thermostat Gasket,.Etc..I'd try that if you are Handy with making stuff from scratch,and like to budget.
I hope that Helps....(btw post #7,000 Woot!)
I have done a couple exhaust pipe gaskets with the Sheet material(NOflame coating and thin steel sandwiched Type stuff)..just Ball peen hammer the surface and cut them to shape.I did the Upper manifold gaskets like that too.I paid like 15 bucks,and I ended up with alot of Material left over to make other Small gaskets,like the Thermostat Gasket,.Etc..I'd try that if you are Handy with making stuff from scratch,and like to budget.
I hope that Helps....(btw post #7,000 Woot!)
Thread
Thread Starter
Forum
Replies
Last Post
matty
3rd Generation Specific (1993-2002)
40
10-06-15 09:13 PM