2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Funny Noise, Please Help, Need Opinions!!!

Thread Tools
 
Search this Thread
 
Old Apr 7, 2003 | 07:15 AM
  #1  
skyypilot's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 354
Likes: 0
From: Connecticut
Exclamation Funny Noise, Please Help, Need Opinions!!!

Okay Guys, here is the story:

I just put a cone filter on my N/A vert. Now I hear a crackling noise at full throttle that sounds like the fan is hitting the shroud (it is NOT, that is just the best description I can provide). I though a few times in the past I could hear something but my thinking is that the stock airbox muffled the sound. I also get a backfire at a redline upshift, every time now. I used to get is only about 50% of the time. The car still has great power but it doesn't seem to be as explosive as it used to be over 5K rpms. I think I know what it is but I am not going to cloud your minds with my thoughts. I would like to hear opinions from as many of you who have real ideas as possible. Also, if it is what I think it is can I remove and rebuild it or do I have to replace it? How can I test it to be sure??

Many thanks to all of you for your time,

Sam
Reply
Old Apr 7, 2003 | 08:33 AM
  #2  
1987RX7guy's Avatar
Eat Rice Don't Drive it.
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Hmmm I get back fires all the time when shifting above 5500rpm nothing wrong with a little of that. well something must be hitting or rubbing something else. do you have the AFM tied down? If not you could have soething hitting it or the cone. Have you checked under the hood while the car was on? Try and look for the problem area like that.
Reply
Old Apr 7, 2003 | 08:54 AM
  #3  
skyypilot's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 354
Likes: 0
From: Connecticut
Cone filter and AFM securely mounted with custom made aluminum backet. It sounds like rapid air gurgle our something other than mechanical. Like water sprinkled on a hot griddle...... I cannot make it make the sound without a high throttle load. Does anyone know of a wheel dyno that is available in CT??
Reply
Old Apr 7, 2003 | 10:01 AM
  #4  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Sounds like it might be knocking/detonation... Did you advance your timing or mess with the A/F adjustment?
Reply
Old Apr 7, 2003 | 11:25 AM
  #5  
skyypilot's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 354
Likes: 0
From: Connecticut
No, I didn't mess with timing or A/F. I don't have the slightest idea how to time this thing either. I have the Haynes manual and a timing light so I will check, but it did not sounds like any detonation I ever heard.
Reply
Old Apr 7, 2003 | 11:53 AM
  #6  
skyypilot's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 354
Likes: 0
From: Connecticut
Keep in mind, it got LOUDER without the stock airbox. It sounds like it might be coming out of the intake........
Reply
Old Apr 7, 2003 | 11:58 AM
  #7  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
well on a rotary detonation sometimes sounds like pop corn popping in the exhaust manifold...

Its the WOT that is throwing me if it is not knocking... I could see a slap from the thottle plates when you lift throttle, but that wouldn't sound like the fan tweaking into something.
Reply
Old Apr 7, 2003 | 08:23 PM
  #8  
skyypilot's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 354
Likes: 0
From: Connecticut
M'kay. I will look into detonation this weekend. It does sound like popcorn popping. It is awful LOUD for that. I thought it might me the ACV malfunctioning. How would you know if that is not making the noise? Ever hear of one making a noise like that? I hear it blamed for the backfire in other posts. Anyone else wanna chime in here????
Reply
Old Apr 7, 2003 | 08:34 PM
  #9  
Swift_7's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 96
Likes: 0
From: Abilene, TX
I wish I could hear it. I'd probably be able to tell what it is.

It sounds like sizzling water???
-weird

Anyways, good luck!
Reply
Old Apr 8, 2003 | 01:38 PM
  #10  
skyypilot's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 354
Likes: 0
From: Connecticut
Is this all you guys got for me?????????
Reply
Old Apr 12, 2003 | 05:27 PM
  #11  
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 61
Likes: 0
From: Gilbert, Arizona
Take it easy

Mine was doing that and I did a complete valve adjust ment on it and everything quieted down.

OOPS! WAIT A MINUTE! Isn't this the Supra BBS?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
izzolaw
1st Gen General Discussion
2
Sep 27, 2015 08:33 PM
Linda_Lovelace
General Rotary Tech Support
0
Sep 18, 2015 10:04 PM




All times are GMT -5. The time now is 05:14 AM.