Project84

Is this the 3-way valve people talk about when they remove the charcoal canister? If so, did I label the lines correctly? Just want to make sure I don't get the wrong one or something.

NZConvertible

It's in the line that goes from the tank to the charcoal canister. Follow the metal lines to see which one goes where. The line out the bottom is open-vented. There is no liquid fuel in any of those lines, just air and fuel vapours.

Project84

So I have these labeled all wrong?

NZConvertible

Look at the schematic of the Evaporative Emissions system in the FSM. That'll make it clear.

Project84

It doesn't really show where stuff is in the car, thats why i took this pic, to see if I'm looking at the right thing. I check out the FSM again though.

Project84

On page 4A-85 in the 86-88 FSM it doesn't show the valve in relation to the rest of the car; only the fuel tank, a line, and the valve. Anyone have a better pictures, like a real picture of the actual valve? I did a search on removing the charcoal canister, but nobody included any pictures.

NZConvertible

You are looking at the right thing.

Follow the metal lines. One will go to the engine bay (charcoal canister) and the other will go up to the top of the tank.

Project84

And the one going to the charcoal canister is the one you leave open to the atmosphere?

NZConvertible

When removing the charcoal canister? Yes.