Fuel System / nitrous
01-27-05, 11:11 AM
#1
No destination.
Thread Starter
Join Date: Jun 2004
Location: Boston area, Mass.
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
Fuel System / nitrous
I am contemplating either a wet or dry set up on my S5 na... roughly a 50 shot... and had a few questions about Sean's write up on 1300cc.com
He said with a dry shot you would only need to upgrade the injectors, but how do the bigger injectors add more gas w/o the need of an upgraded fuel pump and press. reg.
Or is it the case that an upgraded pump and pres. reg. are required for both wet and dry.
He said with a dry shot you would only need to upgrade the injectors, but how do the bigger injectors add more gas w/o the need of an upgraded fuel pump and press. reg.
Or is it the case that an upgraded pump and pres. reg. are required for both wet and dry.
01-27-05, 11:47 AM
#2
Rotary Freak
iTrader: (3)
Join Date: Feb 2002
Location: MN
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
www.1300cc.com
whoops...just saw that you read that page already...nevermind.
there is a section there with a very good writeup on N02 systems for the rotary.
go read
-a
whoops...just saw that you read that page already...nevermind.
there is a section there with a very good writeup on N02 systems for the rotary.
go read
-a
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
21
09-01-15 06:32 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM