I need to know how much a N/a and Turbo fuel pumps litres per hour ..or preferable fuel volume in GALLONS/hr. Thanks

2RICE4U

 

search, I know this topic was covered before comparing stock pumps and walbro 255

 

also if you need some help converting litre to gallon,

http://www.metric-conversions.org/vo...to-gallons.htm

 

Try this link: https://www.rx7club.com/forum/showth...t=gallons+hour

Somewhere hidden in that thread is the real answer. Pick and choose.

 

Any flow figure is completely worthless without knowing the pressure is was taken at. Unless two pumps were measured at the same pressure, you can't compare their flow figures.

 

Well k this question is actually for me....i am wondering cause i have a 350 in my rx7 ..n wondering if a stock even turbo fuel pump is going to work ....the car is about 400 hp...so i doubt it will but all i need is about 80gal/hr....but i was gonna use a fuel pressure regulator..at about 6psi...will a stock pump be at all close to what i need?

 

Anyone with a Mazda FSM can dig up those numbers.

I can't comment on running an FI fuel pump on a carb engine, but I've heard this is not recommended.

The FC turbo fuel pump flows about 50gph easily, but this is at a little over 2 bar of pressure.


-Ted