Fuel Pump Rewire - wear out pump?
Thread Starter
Senior Member
Joined: Jul 2001
Posts: 595
Likes: 0
From: Northern California
Fuel Pump Rewire - wear out pump?
Hey all
I was going to rewire my fuel pump so that its always getting full voltage. Im not worried about too much fuel at idle, because i have a WOLF 3D to control all of that. My only concern is wheather or not having full voltage all the time will put undue stress on my pump, or if its no big deal. Thanks for help!
Graham
I was going to rewire my fuel pump so that its always getting full voltage. Im not worried about too much fuel at idle, because i have a WOLF 3D to control all of that. My only concern is wheather or not having full voltage all the time will put undue stress on my pump, or if its no big deal. Thanks for help!
Graham
what 7
Joined: Feb 2002
Posts: 670
Likes: 1
From: Portage, MI
you could rewire it so it retains the stock resistor assembly. Part of the reason they designed it to give 9v to the pump at idle and crusing was to reduce the load on the pump. The only time 12v goes to the pump is at about 3500 RPMs under heavy load; I've verified this with a fuel pressure gauge.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
Oct 18, 2015 04:01 PM
