Fuel Pump: 4-pin plug...
04-23-04, 06:05 PM
#1
Microtech Tuning!
Thread Starter
Join Date: Feb 2002
Location: 626 Socal
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Pump: 4-pin plug...
I'm curious which pin on the plug is for the fuel pump power, and which is for the fuel pump ground.
Here is a little thing I drew... The horizontal line on top is the clip for the plug... the 4 vertical lines are the pins... This is the plug you see connected to the fuel pump holding bracket...
__
| |
| |
I'm guessing that the top left pin is ground, and bottom left is the power to the fuel pump. The two right pins should be for the fuel level sender or something unrelated to the fuel pump I'm guessing... Correct?
Here is a little thing I drew... The horizontal line on top is the clip for the plug... the 4 vertical lines are the pins... This is the plug you see connected to the fuel pump holding bracket...
__
| |
| |
I'm guessing that the top left pin is ground, and bottom left is the power to the fuel pump. The two right pins should be for the fuel level sender or something unrelated to the fuel pump I'm guessing... Correct?
04-23-04, 08:13 PM
#3
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
the 2 thicker wires are for the pump. black and black with white strip I think. the other 2 for the sender are colors.
I forget if the striped one is power or ground.
I forget if the striped one is power or ground.
04-25-04, 12:32 AM
#4
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
The two thin wires are for the fuel gauge sender and the fuel warning light. One of the two thick wires is fuel pump power and the other is the ground for all three systems.
04-25-04, 04:13 AM
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
The connector attached to the back of the left hand strut tower....the BLUE is for power and the BLACK is for the ground for the pump. See this jpg viewed from the wire side of the plug... http://www.teamfc3s.org/forum/showth...threadid=28704
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
