Fuel Injector ?
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Syracuse New York
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Injector ?
I removed my injectors on my 87 t2, on the block where the injectors go into, if you look down the hole it looks like theirs some kind of insert or screen, does that come out so i can clean them, it looks like some dirt mite of fell in. If so how do thay come out , i tryed to pull them out but idid not want to pull to hard i don't want to brake anything. On my boys FD thay are sleeves that slide in the holds but thay come out real easy.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
They are the injector air bleeds. Yes, they do slide out but unless you can get them from below (by removing the manifold) then they will likely break on the way out and they're about $30 a piece. So just leave them unless you have a specific reason. To get the dirt out, put some grease on the end of a q-tip.
#3
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Syracuse New York
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Aaron Cake
They are the injector air bleeds. Yes, they do slide out but unless you can get them from below (by removing the manifold) then they will likely break on the way out and they're about $30 a piece. So just leave them unless you have a specific reason. To get the dirt out, put some grease on the end of a q-tip.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM