fuel info plz
#2
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
not to sure about your question,,,, injector SIZE or injector location?
The rear roto is fed by the primary injector near the firewall and the secondary injector nearest the firewall.
there are two sets of injectors... The primary set is actually set into the center iron housing of the motor (you have to take the intake off to see them on an N/A) The secondary set is located on the Intake manifold, those are fairly easy to get at.
The rear roto is fed by the primary injector near the firewall and the secondary injector nearest the firewall.
there are two sets of injectors... The primary set is actually set into the center iron housing of the motor (you have to take the intake off to see them on an N/A) The secondary set is located on the Intake manifold, those are fairly easy to get at.
#3
777** The Anti-rice
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
Pasted from rotaryresurrection.com:
Year type impedance plug style plug notch position flow rating color part number
84-85 13B NT low square center 680cc orange 195500-0900
86-87 13B NT low square center 460cc red 195500-1350
86-87 13B T low square center 550cc tan 195500-1370
88 13B NT high square offset 460cc purple 195500-1350
88 13b T high square offset 550cc purple 195500-1370
89-91 13B NT high oval center 460cc red 195500-2010
89-91 13B T high oval center 550cc purple 195500-2020
Year type impedance plug style plug notch position flow rating color part number
84-85 13B NT low square center 680cc orange 195500-0900
86-87 13B NT low square center 460cc red 195500-1350
86-87 13B T low square center 550cc tan 195500-1370
88 13B NT high square offset 460cc purple 195500-1350
88 13b T high square offset 550cc purple 195500-1370
89-91 13B NT high oval center 460cc red 195500-2010
89-91 13B T high oval center 550cc purple 195500-2020
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
3
08-20-15 10:24 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM