2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

fuel ?

Thread Tools
 
Search this Thread
 
Old Aug 3, 2006 | 10:36 PM
  #1  
bmxbassrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 36
Likes: 0
From: Lexington North carolina
fuel ?

hey im having problems getting my car started and i have a ?. I also have a few other ?'s id like to https://www.rx7club.com/attachment.p...d=188942&stc=1
IMG_0367.JPGask. are these hooked up right? the one on the right is the one from the filter.
https://www.rx7club.com/attachment.p...d=188941&stc=1
IMG_0370.JPG
is this worth my or am i better of with the stock box? timehttps://www.rx7club.com/attachment.php?attachmentid=188938&stc=1
IMG_0366.JPG
what the heck is this its inside the right side of my dash, right side of the wheel. what is it for?
any help would be nice. thanks JAKE
Attached Thumbnails fuel ?-img_0366.jpg   fuel ?-img_0370.jpg   fuel ?-img_0367.jpg  
Reply
Old Aug 3, 2006 | 10:37 PM
  #2  
bmxbassrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 36
Likes: 0
From: Lexington North carolina
fuel ?

hey im having problems getting my car started and i have a ?. I also have a few other ?'s id like to https://www.rx7club.com/attachment.p...d=188942&stc=1
IMG_0367.JPGask. are these hooked up right? the one on the right is the one from the filter.
https://www.rx7club.com/attachment.p...d=188941&stc=1
IMG_0370.JPG
is this worth my time or am i better of with the stock box?
https://www.rx7club.com/attachment.p...d=188938&stc=1
IMG_0366.JPG
what the heck is this its inside the right side of my dash, right side of the wheel. what is it for?
any help would be nice. thanks JAKE
Reply
Old Aug 3, 2006 | 11:07 PM
  #3  
tinvestor's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: May 2005
Posts: 919
Likes: 0
From: bartlett IL
3 cruise control wiring harness
2 What are you asking? Do you have it and wonder if it should be installed are you wanting
to know if you should buy one or are you asking if it has all of its pieces?
1 I think american model has filter line (supply) toward firewall but who knows if you have the origional engine in it. It will take you 2 1/2 minutes to swap them much less time than posting that really bad pic so just swap them and see. It will do no harm.
Reply
Old Aug 4, 2006 | 12:18 AM
  #4  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally Posted by bmxbassrx7
what the heck is this its inside the right side of my dash, right side of the wheel. what is it for?
E
Hole is normally filled with either a blank or the cruise control switch.

Not sure what you are asking with the other questions and pictures

Last edited by Icemark; Aug 4, 2006 at 12:20 AM.
Reply
Old Aug 4, 2006 | 12:33 AM
  #5  
adrock3217's Avatar
Boost in..Apex seals out.
Tenured Member 10 Years
 
Joined: Nov 2003
Posts: 1,931
Likes: 0
From: Maryland, 21794
I think he is asking if he should use the K&N AFM vs. his stock one. In which I reply..

The AFM's do not get modified. Someone put a sticker on that when they put a K&N on their car. It is the same as the one you have.
Reply
Old Aug 4, 2006 | 02:32 AM
  #6  
bmxbassrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 36
Likes: 0
From: Lexington North carolina
yea

yea thats whati was talking about with the k and n. but is it a good idea to keep it on or go stock box. what about the fuel lines.
Reply
Old Aug 4, 2006 | 02:35 AM
  #7  
bmxbassrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 36
Likes: 0
From: Lexington North carolina
s

2 i have it in the car and wos wondering if i should keep it in. is it beter thatn the stock box.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
bryancmatthews
Power FC Forum
14
Oct 5, 2015 08:49 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 08:52 AM.