FSM NOT CLEAR on vert top ?
#1
Full Member
Thread Starter
Join Date: Aug 2009
Location: mass
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
FSM NOT CLEAR on vert top ?
looking at the fsm, at the removal of convertible to sec 14 tells you to remove the hook fasteners bolts and nuts then remove the hood outer from the body, my ? is do the bolts have nuts on the back in the car under the headliner or do they thread into the body and do not have nuts ? thank you for your time
#3
Driving RX7's since 1979
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 8 Likes
on
8 Posts
Remove all the plastic fasteners along the bottom of the top from the inside
then
Remove all the 10MM attachment bolts along the outer lip of the top.
Then
you have easy access to the two 10MM bolts that hold each of the spring bracket's.
Don't forget to unplug the window defrost wires before you attempt removal.
then
Remove all the 10MM attachment bolts along the outer lip of the top.
Then
you have easy access to the two 10MM bolts that hold each of the spring bracket's.
Don't forget to unplug the window defrost wires before you attempt removal.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM