Front Windshield Heater/Blower
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Milpitas, California
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
Front Windshield Heater/Blower
So basically my blower only blows forward. it never seems to switch if i put it on defrost it just keeps blowing forward. what could it be? all my buttons work on the logicon maybe wiring issues?
#2
Ban Peak
iTrader: (49)
I doubt it is a wiring issue, I'd try changing the logicon first. It's easy.
If that doesn't work, then I'd check the motor that moves the dampers around to direct air flow.
When you change the logicon, make sure you pop the top panel w/ the defroster vents off the dash. There is a screw covered up by a plastic piece in the middle of the defroster vents. Take the screw out then gently pry up on the panel. It will pop out and the logicon connector is right underneath it.
If you don't do that, it will take you forever to get the logicon out.
#3
Cake or Death?
iTrader: (2)
Tie a length of string to the connector and pull it through the dash when you remove the Logicon.
Then tie it to the new connector and use it to pull the harness back into place.
It's a rather large connector and it travels through a very crowded space, so any help guiding it back into place is a good thing.
Then tie it to the new connector and use it to pull the harness back into place.
It's a rather large connector and it travels through a very crowded space, so any help guiding it back into place is a good thing.
Thread
Thread Starter
Forum
Replies
Last Post