Hi, I just joined the forum, anyways, I have a 91 RX7, It came with the fog lights when I bought (they are the stock ones)I tried to check the fog light bulb since they wouldnt turn on, but when I tried to take them off I noticed there were 3 screws two outer ones that seem to be holding the cover? and one holding the inside I guess? anyways I took the two outer ones (top and bottom) the cover came loose, but when I tried to pull it out it seemed to be held on by another screw on the other side, but I can't see one, can some one tell me how to remove them so I can check the bulb. The fuse is ok.

 

i searched and i found this old thread with the same question i have how do you replace the lights?

 

it tells you how in the owners manual. look at the fog light from the front. To the inside of the lense there are two small screws remove these. to the outside there is a pastic clip that can be removed with a large flat screwdriver. sometimes these are hidden by the plastic shroud. the only way to get the corrrect fog light bulbs is to order them from mazda

 

They are just 55w hc3 bulbs, you can get them at lots of places.

 

I want some yellow bulbs, does anyone here looking at this thread know where to get them.

thanks.

 

Here ya go, I messed up, they're h3c, not hc3

http://search.ebay.com/search/search...e=search&fgtp=

 

I need help installing the fog. I have a GTU no fog light and need some parts list. I do have everything, the metal bracket, relay, switch, the pig tail (that what they call it attach to the light). I really want a picture of these part from those of you that have the fog light installed or originally came with the car.
I took some pictures and posted on a new thread about how come my left side pig tail is different than my right side pig tail, and one of my cord is broken can that be fix or I need a new one. Anyone know what I'm talking about.
thanks