FMIC custom design
#1
It's a Hammer
Thread Starter
Join Date: Jul 2002
Location: Richland WA
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
FMIC custom design
Im working on a custom FMIC. It will in the stock frame opening. The core is high flow , very high effiency core with internal fins just like bar and plate. Will require minimal fitmint. Will work with AC. You can mount a fan to the back of it or get a new larger radiator. Way way cheaper than the ones on the market. I contacted the shop that does this one:
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEBWA%3AIT
I am going to take my car to his shop and he is going to put a prototype together for me.
Going to route the drivers side under the bottom through that foam pad and route along the firewall on the drivers side.[IMG]C:\VSTASCAN\image\TMP19[/IMG]
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEBWA%3AIT
I am going to take my car to his shop and he is going to put a prototype together for me.
Going to route the drivers side under the bottom through that foam pad and route along the firewall on the drivers side.[IMG]C:\VSTASCAN\image\TMP19[/IMG]
Last edited by dr.jones63; 04-12-04 at 05:09 PM.
#3
Piston.... whats that?
Join Date: Jan 2004
Location: Somewhere on 264
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Cool, another one. https://www.rx7club.com//showthread....hreadid=284735
#4
It's a Hammer
Thread Starter
Join Date: Jul 2002
Location: Richland WA
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
I live in the desert and no A/C is not an option. I am going to check on having the tubing sprayed with thin coat of rino-lining for a cool look and insulation.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM