fmic
#3
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Intercoolers are not rated by horsepower. Generally, you need a bigger intercooler as the boost level increases, especially if you are using the stock turbo or a cheap aftermarket turbo. However, the more accurate math is rather complicated. Also generally speaking, a more square shaped intercooler is better than a more retangular shaped intercooler, and you will probably want to stay under 3.5" thickness on a street car.
As for what your front end will support, you will need to use a tape measure and decide for yourself unless you buy a kit that is guaranteed to fit. A cardboard mock-up is a good idea if you are planning a custom setup.
As stated above, just Search for "FMIC" in thread titles of this 2gen forum if you want examples of what other people did.
As for what your front end will support, you will need to use a tape measure and decide for yourself unless you buy a kit that is guaranteed to fit. A cardboard mock-up is a good idea if you are planning a custom setup.
As stated above, just Search for "FMIC" in thread titles of this 2gen forum if you want examples of what other people did.