A few random questions...
01-17-04, 08:14 PM
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: Canada
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
A few random questions...
1) I am removing the heater in my car, do I just block off the heater hose nipples on the block and the radiator? If so, what can I block it with?
2) I removed power steering, but I am wondering what works better, looping the lines together, or putting bolts in the holes?
3) Can I fill the cooler hose hole with JB weld on the steering rack? Will the power steering fluid break down the jb weld at all?
4) I removed twin scroll and I got the hole in the manifold threaded, I used a stainless steel bolt with thread locker in the hole. The place I bought if from said it would stand the heat. Do you think it will?
2) I removed power steering, but I am wondering what works better, looping the lines together, or putting bolts in the holes?
3) Can I fill the cooler hose hole with JB weld on the steering rack? Will the power steering fluid break down the jb weld at all?
4) I removed twin scroll and I got the hole in the manifold threaded, I used a stainless steel bolt with thread locker in the hole. The place I bought if from said it would stand the heat. Do you think it will?
Thread
Thread Starter
Forum
Replies
Last Post
Donald Hampton
2nd Generation Specific (1986-1992)
5
09-17-15 03:13 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM