fd uim and bac valve
07-10-12, 07:52 PM
#1
fd uim and bac valve
Ok planning on using a fd uim, the fc and fd bac valves are similar so my question is can it be wired up to use with the stock ecu. Ive searched but all ive found is the tps rewire. Any help or links is much appreciated.
07-17-12, 04:39 AM
#2
Backyard Mechanic
I was looking into this.
Found this:
Rising RPM
But when looking at what people gained from doing this didn't seem like much.
Anyone got this setup running on their FC?
Found this:
Rising RPM
But when looking at what people gained from doing this didn't seem like much.
Anyone got this setup running on their FC?
07-17-12, 08:28 AM
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
It actually just got released into the market on the 28th of June.
BUT,I got one,of Course,like white on Rice!..here it is on the car and I am just buttoning it up now to test it.
Oh,the upper manifold is bare,no BAC..nothing.(twin butterflies removed,bare bones throttle body)
BUT,I got one,of Course,like white on Rice!..here it is on the car and I am just buttoning it up now to test it.
Oh,the upper manifold is bare,no BAC..nothing.(twin butterflies removed,bare bones throttle body)
07-17-12, 01:28 PM
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
use the FD valve, its electrically the same, and its bolted to the manifold...
