FD Alternator Kits - fitted for FC's now for sell*last date to purchase Is Sept 1!!!*
02-21-05, 07:23 PM
#1
FD Alternator Kits - fitted for FC's now for sell*last date to purchase Is Sept 1!!!*
Here we go again!
Due to the huge success the first time around I am now offering these again!
I know that some members do not frequent the 2nd Gen Parts Forum so I was able to, as a paid advertisor, have a thread devoted to what I am offering In here.
They are not replicas but authentic 1993-1996 OEM FD Alternators. They crank out 100 ampheres but the tests I have performed (prior to shipping) puts out an average of 130 ampheres. Every Alternator Is tested before sold.
Each FD Alternator comes with an optional Single or Double Pulley, neccesary Harness Plug to do the conversion properly (provided you have a s4 with s5's being compatible with the s6's therfore the Plug will not be needed to be swapped nor be supplied).
Shipping Is set at $18.83usd + $165usd for the FD Alternator Kit which amounts to $183.83usd. I should be careful with what I say. This Is for the States as Canadian orders will be paying abit less.
FWIW, I'll provide detail specs as from the Import Electrical: Applicaton and Identificaton Catolog 1998 Edition
1993-1996 RX-7 OEM A3T 08591// N3A! 18300A
AMP 100 Ref No: AL4213X, A8432, 13460
The specs, aswell as a picture, of the FD Alternator Is Illustrated on pg 348, 2nd row, 2nd pic on the right.
Mitsubishi
136mm/CW (Internal core)
5G (based on stock pulley - 5 groves)
A:10mm @ 12 (Alternator Post nut)
B:10mm @6
C:10mm x 1.25 @6
D:66mm (Main Pulley Nut)
Can Use:UDL (Cannot use any other parts but specified)
Any questions you may have may be directed to the link below or by PM's. Thanks!
(Moderator's note: silverrotor is a paying vendor on this forum. Sticky made with permission.)
Due to the huge success the first time around I am now offering these again!
I know that some members do not frequent the 2nd Gen Parts Forum so I was able to, as a paid advertisor, have a thread devoted to what I am offering In here.
They are not replicas but authentic 1993-1996 OEM FD Alternators. They crank out 100 ampheres but the tests I have performed (prior to shipping) puts out an average of 130 ampheres. Every Alternator Is tested before sold.
Each FD Alternator comes with an optional Single or Double Pulley, neccesary Harness Plug to do the conversion properly (provided you have a s4 with s5's being compatible with the s6's therfore the Plug will not be needed to be swapped nor be supplied).
Shipping Is set at $18.83usd + $165usd for the FD Alternator Kit which amounts to $183.83usd. I should be careful with what I say. This Is for the States as Canadian orders will be paying abit less.
FWIW, I'll provide detail specs as from the Import Electrical: Applicaton and Identificaton Catolog 1998 Edition
1993-1996 RX-7 OEM A3T 08591// N3A! 18300A
AMP 100 Ref No: AL4213X, A8432, 13460
The specs, aswell as a picture, of the FD Alternator Is Illustrated on pg 348, 2nd row, 2nd pic on the right.
Mitsubishi
136mm/CW (Internal core)
5G (based on stock pulley - 5 groves)
A:10mm @ 12 (Alternator Post nut)
B:10mm @6
C:10mm x 1.25 @6
D:66mm (Main Pulley Nut)
Can Use:UDL (Cannot use any other parts but specified)
Any questions you may have may be directed to the link below or by PM's. Thanks!
(Moderator's note: silverrotor is a paying vendor on this forum. Sticky made with permission.)
Last edited by Aaron Cake; 02-22-05 at 01:14 PM.
07-14-05, 05:33 PM
#3
As good things come to an end I can say the same In this case.
I will no longer be selling FD Alternator Kits come September 1st, this will be the last day!
This Is primarily due to the simple fact that my reserves are coming to an end. Should I find that I am no longer In a position to accomadate members orders than I will report back to notify the community.
Thanks for allowing me to have a role In your RX-7.
It has been a great experience!
I will no longer be selling FD Alternator Kits come September 1st, this will be the last day!
This Is primarily due to the simple fact that my reserves are coming to an end. Should I find that I am no longer In a position to accomadate members orders than I will report back to notify the community.
Thanks for allowing me to have a role In your RX-7.
It has been a great experience!
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
