FC greddy turbo kit upgrade
06-27-10, 01:13 AM
#1
hows your burger?
Thread Starter
Join Date: Feb 2008
Location: Temecula
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
FC greddy turbo kit upgrade
I'm thinking about going for it and getting the TD06 upgrade kit. I was just wondering what other supporting mods am i going to need in order to run this upgrade properly. I highly doubt I can just bolt this kit on and go. so I wanted to know, what else would I need?
It wont happen overnight, but my goal would to reach the 350whp range
It wont happen overnight, but my goal would to reach the 350whp range
06-27-10, 01:28 AM
#2
This is the 20G kit? Yeah 350rwhp is about what that kit can do from what people have posted on here. You will need at least an Rtek 2.1 for engine management and 720/1000 injectors with a rewired and upgraded fuel pump. You'll want an intercooler upgrade (most likely an FMIC). You may need an upgraded radiator and you'll need something to control boost as well. That's assuming you already have a 3" exhaust.
06-27-10, 01:47 AM
#3
hows your burger?
Thread Starter
Join Date: Feb 2008
Location: Temecula
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
yea its the 20G kit. im stock exhaust right now, but i can replace that soon, so 3" is the minimum diameter? I'm not too familiar with what management systems are better or worse. What is your opinion on management, you said, Rtek 2.1, but theres quite a few options. I've heard people favoring the haltech's like the E8 and others. or is the Rtek sufficient enough for the HP level i'm trying to reach?
06-27-10, 12:46 PM
#4
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,816
Received 2,586 Likes
on
1,837 Posts
yea its the 20G kit. im stock exhaust right now, but i can replace that soon, so 3" is the minimum diameter? I'm not too familiar with what management systems are better or worse. What is your opinion on management, you said, Rtek 2.1, but theres quite a few options. I've heard people favoring the haltech's like the E8 and others. or is the Rtek sufficient enough for the HP level i'm trying to reach?
next choice would be maybe the PFC or the Motec.
06-27-10, 05:53 PM
#6
hows your burger?
Thread Starter
Join Date: Feb 2008
Location: Temecula
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I'm running kind of a tight budget. It may take me some time. slowly but surly i'll save up till I reach my goal.
So i'm not needing a top of the line, state of the art 5000 dollar tuning system
So i'm not needing a top of the line, state of the art 5000 dollar tuning system
Thread
Thread Starter
Forum
Replies
Last Post
