FC engines
#1
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Canada
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
FC engines
Hey I have a 86 non turbo, would a 87-88 13b turbo fit in my car, with the exception of needing to change the hood for the intercooler???
does anyone know if its been done before?
does anyone know if its been done before?
#4
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Canada
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
yeah ok there.. I tried seaching but all I keep getting is a msg that says "The administrator has disabled this function" thats why I'm asking you guys...
#6
Former Moderator. RIP Icemark.
Unless you have a 'vert it is not generally cost effective to change the motor to a 13BT, from a 13B.
You would need to change:
Motor (including things like AFM/intercooler/throttle body/engine mounts/etc)
Harness (or add a few wires and move a couple of pins)
flywheel
clutch
ECU
Exhaust
Brake vacumn line
add a boost gauge
and to do it right also change:
Trans
rear end including half shafts
drive shaft
trans mounts
Cruise control body
inst cluster
if you used a Jspec you would need the T2 hood, but several people have said the North American version fits under the NA hood.
There has only been about twice weekly your request of info...
You would need to change:
Motor (including things like AFM/intercooler/throttle body/engine mounts/etc)
Harness (or add a few wires and move a couple of pins)
flywheel
clutch
ECU
Exhaust
Brake vacumn line
add a boost gauge
and to do it right also change:
Trans
rear end including half shafts
drive shaft
trans mounts
Cruise control body
inst cluster
if you used a Jspec you would need the T2 hood, but several people have said the North American version fits under the NA hood.
There has only been about twice weekly your request of info...
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM