FC Door/Window Problem
well your door hancle might be broken internally. mine was. or a rod is unhooked inside the pannel. are your windows automatic or manual? id take of the interior panel and take a look its simple
Joined: Aug 2001
Posts: 6,096
Likes: 9
From: So Cal where the OC/LA/SB counties meet
Does not go up or go down?
My guess, agreeing with above, is the arm on the inside that push's the rod down to release the door latch broke. If it completely broke off, it could have fallen across the inner body of the door to under the window blocking it from going down.
Or, could be a coincidence and the window regulator broke about the same time. Vert regulators aren't as durable as the coup window regulators.
To confirm, as said above, you need to remove the door panel and peal back the plastic sheet to take a good look. Try and not tear the plastic sheet as it does serve a moisture sealing purpose.
My guess, agreeing with above, is the arm on the inside that push's the rod down to release the door latch broke. If it completely broke off, it could have fallen across the inner body of the door to under the window blocking it from going down.
Or, could be a coincidence and the window regulator broke about the same time. Vert regulators aren't as durable as the coup window regulators.
To confirm, as said above, you need to remove the door panel and peal back the plastic sheet to take a good look. Try and not tear the plastic sheet as it does serve a moisture sealing purpose.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM






