Node

iTrader: (1)

Does anyone have some copies of F-Con instructions. Just bought a used F-Con and want to go over everything before I install it. Seems very very simple and I know what goes where but just want to make sure

And does the top come off, or the bottom plate to change the rom? Want to make sure its not a hks turbo kit rom and just the stocker.

Thanks,
Ben Martin


I <3 F-Con!$!@#%@#^$@$%&YOJTO^J#$J#$@%@#!#%

Node

iTrader: (1)

and where does the pressure sensor wires hook into? i have a couple slide over pin connectors or something. I think it goes somewhere on the harness that plugs into the back of the F-Con.
Anyone have the pinouts?

Node

iTrader: (1)

anyone? please baby baby please!

id love a picture of the color wires that go from the pressure sensor to the harness, like where on the plug they go. mine are pulled out. d'oh. thats about my only big question.

Please baby baby please!

DaleClark

iTrader: (55)

I had an FCON back in the day - I'll have to look, I may have electronic versions of the manual.

It should come with the black FCON box itself, the harness that goes between the stock ECU and the stock wiring harness, the HKS FCD, and the pressure sensor. The FCD ties into the harness by the stock ECU, and the FCON pressure sensor goes more toward the FCON in the harness - it's output is strictly for the FCON itself.

Shouldn't be too hard to find the wiring for the pressure sensor - it's 3 wires, 5 volt, signal, and ground.

Take the top of the FCON case off - 4 screws, and you'll see everything and the ROM.

If you have real specific questions like wire colors, don't hesitate to call HKS USA - those guys are VERY helpful and knowledgeable, and have helped me out a ton.

Dale