theflatlander

iTrader: (3)

I have a RB off-road header and want to straight pipe off of it but I don't have any tools or resources that'll help me (welder, piping...)a friend of mine has a welder but that still leaves me with bending pipe. I am going to have a flange made so that I can connect the two header pipes into a 2.5in pipe but I still won't be able to get piping put on due to the cats and legallity of removing them. So my question is could I get a shop to measure,bend a pipe for me and I put it with them knowing what I'm going to do?

1987RX7guy

iTrader: (3)

Just say its for a tractor or your race car.

theflatlander

iTrader: (3)

Well aren't I going to have to have them measure and bend the piping accordingly so it will come out the stock location?

1987RX7guy

iTrader: (3)

Take the plates and tags off of the car and say its your rally car or something. Otherwise most won't touch it.

theflatlander

iTrader: (3)

i'll try it. thanks

NA_VersionFC3S

you might have to have it towed to the muffler shop with no tags. that is what a muffler shop told me before. If you drive it in, it looks kind of suspicious.

Tim