Mitsuko28

My car is running very rich. I have the RB 3" turbo back exhaust. When I put the BOV on it it ran more rich. It seems to have some sort of gas or exhaust leak. I believe there are new gaskets, at least the gasket connecting the turbo to the downpipe. The smell is strongest in the cabin and under the car, but not under the hood. Im not sure what to do. Please help, any input or ideas. The smell is very strong and it burns my eyes. Thanks.

RikkiAnn

RotaryResurrection

iTrader: (8)

UHm...go to the inside of the car, and pull the hood latch. Go outside, raise the hood, and insert the prop rod. Now, see that big silver thingy on top of the motor? See what it says in big red letters?

"turbo rotary"...

That, my friend, is your problem.

Seriously, rotaries don't burn very clean, idle very well, or get very good gas mileage. IT"s just the nature of the beast. Like I enjoy telling so many people, it isn't a toyota camry, it is a rotary sportscar.

The fact that you have removed all your cats could have something to do with the sudden increase, though...

Mitsuko28

thanks for your help

RotaryResurrection

iTrader: (8)

And what does that have to do with anything I just said?

DUMBASS!

BTW, who is the real dumbass here...me, or the dumbass who is standing behind the car crying??

**For those wondering, the above poster's original response was "i have a rebuilt engine, dumbass"...**

Mitsuko28

STFU! who are you to tell her that? stop being a smart *** bitch, you want to talk taht way call my phone ill PM you my number and my address so you can bring your hick *** to socal

fcturbo2

Go easy on her..she's my friend...LIke I told you earlier. Check for exaust leaks from manifold to the presilencer. I would do it but im busy.. Gaskets do go bad.. It worries me when you said that you smell fuel too or maybe you are just confuse between the 2. But when i rode in your car i did smell exaust fumes.. I have the same problem except 3 times worst..Good luck! JEFF

fcturbo2

You guys obviously had a rough day....i dont see a point why this has to be argued upon...EIJIE you are just gonna confuse him with your post...

RotaryResurrection

iTrader: (8)

Take it easy on her (her, him, them, whoever is behind that computer) my ***. A question was posted, some facts were posted, and I was called a dumbass. F@%* that. They are the ones who need to take it easy.

fcturbo2

OOPPS she did EDIT the post but i guess it was too late..LOL

fcturbo2

Kevin-- let me change the subject...did you just take that photo of you chopping that FC??... ohhh and i have a friend who is looking for a low comp turbo rotor.. Got any???..also if you buy NA rotors for your rebuilds..He has a pair of NA rotors and just wondering if you want to work out a deal???/

hyp36rmax

haha yeah sorry jeff haha i thought it was my S\N, that dude needs to chill, no where did i see she called him a dumbass, but oh well, just reacting =-)

RotaryResurrection

iTrader: (8)

We did that last week, yes. That is the company bitch doing the chopping, not me

I will be posting a thread with other cool pictures here in a few minutes...I just made an engine testbed type deal for running engines outside a car. Made some noise, shot some flames, **** like that

Have him PM me.

You must not have looked quickly enough then. As soon as i posted, I hit refresh to see if anyone else had already posted, and saw that reply "I have a rebuilt engine, dumbass". And I thought to myself, what in the **** does that have to do with ANYTHING I just said??? Then I wrote what I did. Why else do you think I would say that?

fcturbo2

Kevin- he is not in the forum so anything you want to tell him just email it to me.

Testbed..ohh how nice.. I know this shop that works on high performance Mustangs and he has that testbed and its awesome when he test those engines.. Loud as hell and flames everywhere...

Anarx

hummm kevin when did you change your name and why?

and as far as your oginal responce to her it was out of line... you dident have to insult her.. i would be pissed if you talked to me like that...

just responding to this post becuse she is my friend...

RotaryResurrection

iTrader: (8)

**Even though apparently no one but me saw it (it was edited out too quickly), I WAS INSULTED FIRST by being called a dumbass when all I did was try and help. I did nothing to "her" that wasn't done to me first. I refuse to take bullshit from ANYONE, bottom line.**

Does anyone have a problem with that?

Anarx

i was talking about your initial post

RotaryResurrection

iTrader: (8)

Can you please explain to me what is wrong with telling someone that a turbo rotary, by nature, runs rich, and stinks out the exhaust, especially when all the catalytic converters are removed??? Am I missing something here?? Was the aim of this post not to ask a question, and did I not give potential answers to that question??



True, I did so in a roundabout way...I enjoy making my posts somewhat entertaining...so sue me. Jeezus...

Anarx

it just came off as condasending thats all

xfeastonarsex

iTrader: (5)

I think it was a more interesting way of putting it than, "hey your engine will do that ****." It wasnt a question needing an indepth answer so you gave him an approprite one. I dont understand what the part about it being a rebuilt and you being a dumbass was all about either... I thinkn you were in the right, if anyone cares what I think...

2ndGen.rocket

Thats because this is the internet. If you can't take sarcasm, don't go outside, and definitely don't come on this forum. It wasn't a big deal, he gave her an answer in a joking manner. Who gives a ****.

Zero Cylinder

hahahaha arent you just the forum bad *** keyboard warrior........pm me your cell phone # =]

RotaryResurrection

iTrader: (8)

"keyboard warrior"...lol...

I prefer e-thug

rx-7s rock

Kevin, I am behind you 100% on this one man, your original post was not condecending, it was funny. Not to mention her calling you a dumbass was not needed. And to everyone that is mitsuko's friend, YOU'RE TOO ******* SENSITIVE!!!! Get over it, god...all he AND she did was call eachother a dumbass. Boo hoo....he called me a dumass. I apologize, I needed to rant about that.




























you big bunch of pussies.

Zero Cylinder

rzograbian

well i have a 3rd gen so this info might not be helpful but did you try to tighten the bolts that connects the cat back to the midpipe or any other connections?

that was the problem on my car but i am not sure on yours...

btw... what bov do u have??

see you around