ramses666

iTrader: (1)

the clutch master & slave write up in the archive shows the spring in the master cylinder backwards. I tried it and spent a couple of hours messing with it. I thought maybe I had put it together wrong so I removed the master cylinder after an hour of trying to bleed the silly thing. I had assembled the parts as shown in the picture and reassembled the thing and tried to bleed the clutch again... no luck... so I removed the master cylinder a third time and started messin' with it on the bench. It obviously wasn't moving fluid, seemed to have a binding problem as well. I took the master apart again and turned the spring around and tested it on the bench and it seemed to function properly. after re-installing it in the car the clutch bled immediately and all was well. I figure I wasted a good three hours because of an error in an archive write-up picture. Beware!!

Ramses666