Enough fuel for setup?
Thread Starter
Joined: Apr 2002
Posts: 1,470
Likes: 15
From: Mesa, AZ
Enough fuel for setup?
I have an s5 TII engine which will be street ported, stage 3 BNR turbo upgrade, or maybe a T04..., and full racing beat exhuast, run by a microtech.
Right now for fuel what I have is a walbro 255lhp fuel pump, and I'm seriously considering running gsl-se 680cc injectors. I do not have any fuel injectors right now, so I will need to buy all 4 of them. If I get 4 680cc injectors, will that provide enough fuel for my mods?
The reason im going with the gsl-se injectors is because I can buy them rebuilt for $40 a piece, which is a lot cheaper than $100 each..
Any suggestions?
Right now for fuel what I have is a walbro 255lhp fuel pump, and I'm seriously considering running gsl-se 680cc injectors. I do not have any fuel injectors right now, so I will need to buy all 4 of them. If I get 4 680cc injectors, will that provide enough fuel for my mods?
The reason im going with the gsl-se injectors is because I can buy them rebuilt for $40 a piece, which is a lot cheaper than $100 each..
Any suggestions?
...
Joined: Aug 2001
Posts: 7,539
Likes: 0
From: Tampa, FL
Depending which turbo you get and what boost you run, 4x680cc injectors should be fine. I know it will be for basically any hybrid you run. Now a full T04, you will want to go full standalone and maybe 680 primaries and 1600 secondaries.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
ChrisRX8PR
Single Turbo RX-7's
21
Oct 18, 2015 04:01 PM