Engine Help
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: United States
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Engine Help
im not sure what to do. i have a 1986 rx7 gsx. it has about 60,000 on the engine but it needs seals and apparently that is expensive to have done. so should i:
buy a new engine for it i found with 3,000 miles rebuilt for 450 OBO?
look for an engine with the turbo II? and how much would that cost and would it fit just like my current engine does?
or fix my current engine which has about 60,000 miles on it? apparently that is expensive. so what should i do?
thanks
buy a new engine for it i found with 3,000 miles rebuilt for 450 OBO?
look for an engine with the turbo II? and how much would that cost and would it fit just like my current engine does?
or fix my current engine which has about 60,000 miles on it? apparently that is expensive. so what should i do?
thanks
#2
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 2 Likes
on
2 Posts
What seals do you need? Apex seals, oil seals, water seals?
I bought an engine from a guy cause it was leaking coolant into the combustion area. It had about 60k on it like yours when I got it. I thought the water seal was broke, but it broke because the channel that the seal sits it broke, like in this picture.
I bought an engine from a guy cause it was leaking coolant into the combustion area. It had about 60k on it like yours when I got it. I thought the water seal was broke, but it broke because the channel that the seal sits it broke, like in this picture.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM