engine building FAQ
#1
Yar-Har-Har
Thread Starter
Join Date: Sep 2002
Location: Nashville, 37217
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
engine building FAQ
does anyone know of a step by step guide to building the engine up..
not an actuall rebuild per se, more of like...
i have the engine in short block form, and i need a guide to re-attach all the stuff, to make it ready to drop in....
i follow lists, and guides really well, so i think if i had an actuall faq or something that walked you thru the steps of putting the engine back together i could get this done in a few days work....
i have the haynes, and the FSM, but they both are kinda vague in some aspects....
im really looking for a step by step guide to do this...
if anyone has spotted one or knows of a site that has this info on it, i would really appreciate it!
thanks
=-dustin
and i did search, but to no avail
not an actuall rebuild per se, more of like...
i have the engine in short block form, and i need a guide to re-attach all the stuff, to make it ready to drop in....
i follow lists, and guides really well, so i think if i had an actuall faq or something that walked you thru the steps of putting the engine back together i could get this done in a few days work....
i have the haynes, and the FSM, but they both are kinda vague in some aspects....
im really looking for a step by step guide to do this...
if anyone has spotted one or knows of a site that has this info on it, i would really appreciate it!
thanks
=-dustin
and i did search, but to no avail
#3
Yar-Har-Har
Thread Starter
Join Date: Sep 2002
Location: Nashville, 37217
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
yeah...im looking for something i can have access to in like the next day, or by tomorrow anyway...i finallly have all my parts to build my engine back to long block form, and its a bit intimidating...
#4
FC 2 NV
Join Date: Jun 2003
Location: Lancaster, CA.
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Have you tried www.rotaryresurrection.com yet? In Kevin's TECH link, I think he has a longblock-to-shortblock and back writeup (not positive, but check it out anyhow)
#5
Yar-Har-Har
Thread Starter
Join Date: Sep 2002
Location: Nashville, 37217
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
i might be able to use that as a rough guide, but its for NA engines, and i would have to follow it in reverse...which wouldnt be a big deal, but theres some stuff that wont be covered as far as the turbo stuff, and thats for sure something i need
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM