Electrical Problems, Lights work, Nothing elce!
01-07-05, 08:33 PM
#1
Windsor, Ont
Thread Starter
Join Date: Sep 2002
Location: Windsor, Ont
Posts: 1,175
Likes: 0
Received 0 Likes
on
0 Posts
Electrical Problems, Lights work, Nothing elce!
Hi guy's.. I just removed my Power Steering, AC and AirPump..
Now I have no power whatsoever except for my headlights. No radio, no fan, no idiot lights, ect. JUST headlights/guage lights, and I think my tail lights.
I checked the wiring harness, All the connectors, Main Fuse, ALL the fuses under the hood and inside
I just removed the 2 wire clips on the PS pump, and the one wire on the A/C. I tryed hooking them back up, not connected to the mount (because it's not attached to the engine anymore and no luck)
the airpump had no wires, and I took care in removing it, I checked all the wires around it..
so yah, whats up with this? I need my car running tonight! SO PLEASE GIVE ME IDEAS!!!
Now I have no power whatsoever except for my headlights. No radio, no fan, no idiot lights, ect. JUST headlights/guage lights, and I think my tail lights.
I checked the wiring harness, All the connectors, Main Fuse, ALL the fuses under the hood and inside
I just removed the 2 wire clips on the PS pump, and the one wire on the A/C. I tryed hooking them back up, not connected to the mount (because it's not attached to the engine anymore and no luck)
the airpump had no wires, and I took care in removing it, I checked all the wires around it..
so yah, whats up with this? I need my car running tonight! SO PLEASE GIVE ME IDEAS!!!
01-07-05, 08:38 PM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
A BLACK wire feeds the ignition switch. It runs from the engine fuse box to the ignition switch leads. It has a connector about six to ten inches from the engine fuse box. It is a single blade connector. It is very near where you have been working on the pwr steering etc. I bet it got decoupled.
Headlights will work with this wire disconnected.
Headlights will work with this wire disconnected.
01-07-05, 09:29 PM
#3
Windsor, Ont
Thread Starter
Join Date: Sep 2002
Location: Windsor, Ont
Posts: 1,175
Likes: 0
Received 0 Likes
on
0 Posts
OMFG Hailers.. I owe you my life..
I dont know how you figured it was that, but I checked and that was it!!
I dont know how that got disconnected!, must have been when I was pulling out the AC compressor.
I dont know how you figured it was that, but I checked and that was it!!
I dont know how that got disconnected!, must have been when I was pulling out the AC compressor.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM