Electrical Caps For Top Of Injectors
#1
Senior Member
Thread Starter
Join Date: Oct 2003
Location: CALIFORNIA
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Electrical Caps For Top Of Injectors
Does it matter what cap goes where on the top of the injectors? i was told they both do the same thing . so it doesnt matter. Is that true? thanks
#3
Senior Member
Thread Starter
Join Date: Oct 2003
Location: CALIFORNIA
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
ok fuel pumps pumping geting fuel from the fuel filter to the fuel rail, switched the injector plugs , it fires for a split sec then just cranks, so im thinking that its something with the fricken injectors, but i had the injectors checked out before installing them both were good. so now what????<<<<< loading shot gun here, lol getting ready for a big bang!!!!
#4
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Patience grasshopper.
Some things to check:
Is the complete intake hooked up tight?
Is the AFM plug in right side up & tight?
Is the CAS connector in tight?
Blink the ECU codes for any other clues..
Some things to check:
Is the complete intake hooked up tight?
Is the AFM plug in right side up & tight?
Is the CAS connector in tight?
Blink the ECU codes for any other clues..
#5
Green Flameless
iTrader: (2)
Join Date: Feb 2002
Location: North Central PA
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
You could always make a test light to check the connection to your primary fuel injectors. At this point, I do agree with you that's a fuel supply problem Put your test light into the connector, and see if it blinks, if it does, you're getting juice to the injectors, so your problem is most likely your injectors themselves (for whatever reason).
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM