Electric Oil Temp. Guage install, HELP!... * Pic *
#1
- Make Haste -
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Electric Oil Temp. Guage install, HELP!... * Pic *
Hey,
How the heck do i connect this wire to this sensor!?..
i figure, strip the wire down an inch or so, wrap / twist it around the end, then use the washer/nut to hold it in place?...
Thanx for any help!...
How the heck do i connect this wire to this sensor!?..
i figure, strip the wire down an inch or so, wrap / twist it around the end, then use the washer/nut to hold it in place?...
Thanx for any help!...
#4
- Make Haste -
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by black_88
im going to be buying one of those guages. and I whould like to know where you are installing that so I know where to put mine.
awesome quality, but if your only using it for temp. you'll need to buy a 3/8 cap for the one hole as it doesent come with one....
#6
- Make Haste -
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by black_88
thanks Im going to be getting that one then. but where dose that one go.
Thread
Thread Starter
Forum
Replies
Last Post