ECU codes 13 and 17
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Nov 2001
Location: charlotte
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
ECU codes 13 and 17
13:Pressure Sensor
17:Feedback System
does anyone know what would cause these two codes to appear?
the engine light comes on below 3k RPMs at >50% throttle.
im guessing they appear together b/c they just showed up the other day and.
car runs fine. idles terrible when enigne is cold and the weather is cold. bounces b/t 1500 and 1600 RPMs-may be unrelated to codes though.
ive got a new O2 sensor sitting in garage-would that make the feedback system code dissapear if i put it in?
thanks for any help ahead of time
17:Feedback System
does anyone know what would cause these two codes to appear?
the engine light comes on below 3k RPMs at >50% throttle.
im guessing they appear together b/c they just showed up the other day and.
car runs fine. idles terrible when enigne is cold and the weather is cold. bounces b/t 1500 and 1600 RPMs-may be unrelated to codes though.
ive got a new O2 sensor sitting in garage-would that make the feedback system code dissapear if i put it in?
thanks for any help ahead of time
#2
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
17 is O2 sensor code. with car running check the voltage of the 02 (while it is still pluged into the harness). if it's 0 or under .1 the harness wire is probably grounding somewhere. if it's something else get a new O2 sensor.
is the vac line on your pressure sensor?
is the vac line on your pressure sensor?
#4
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
ya code 15 means the oxygen sensor output remains below 0.55v 80 sec. after F/B system operation beginning
and code 16 means the oxygen sensor output remains 0.55v 10 sec. after F/B system operation beginning
http://www.1300cc.com/howto/how2/codes.html
and code 16 means the oxygen sensor output remains 0.55v 10 sec. after F/B system operation beginning
http://www.1300cc.com/howto/how2/codes.html
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM