2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Door Lock Question

Thread Tools
 
Search this Thread
 
Old Nov 26, 2009 | 09:28 PM
  #1  
AEmatt17's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Columbus, OH
Door Lock Question

My driver's side door lock cylinder is jammed from someone breaking into my car so I was looking to replace both locks. Does anyone know where I can find replacement locks? Second questions is if I replace the locks, how will this effect the stock security system as it is armed and disarmed through the locks? Thanks in advance.
Reply
Old Nov 26, 2009 | 09:32 PM
  #2  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
http://www.mazdatrix.com/interior.htm
Reply
Old Nov 26, 2009 | 09:45 PM
  #3  
AEmatt17's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Columbus, OH
Thank you very much. Im guessing there is a wire that connects to the lock that runs to the security system? Just trying to see what I'm getting myself into before i start.
Reply
Old Nov 27, 2009 | 10:21 AM
  #4  
R.E.wing_FC3s's Avatar
*reallly knowing the fc
Tenured Member 10 Years
 
Joined: May 2007
Posts: 160
Likes: 0
From: victory lane
I had the same issue when i first bought my fc way back in 2000. the door lock cylinders have a lever that the comes with them, or at least can be removed (circlip)and transfered to the new cylinder. this lever acts on a switch that arms or disarms the alarm. it is separate from the lock cylinder and will not need to be messed with when you replace the cylinder.
Reply




All times are GMT -5. The time now is 11:23 PM.