Door Dummy Light
05-03-05, 09:54 PM
#1
Rotary Freak
Thread Starter
Join Date: Jun 2003
Location: Metro Detroit
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
Door Dummy Light
I finally got all the other (seat belt & emergency brake) dummy lights to stop but I can't seem to get the door dummy light to go away.Is there something stuck that I should un-stick?
05-05-05, 01:24 AM
#2
Junior Member
Join Date: Nov 2001
Location: Tecoma Australia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Had same problem with my S4 Aussie model, do you also have the door ajar light on the instrument cluster permanently on?
Could not work out what caused it could not locate any obvious faults, would also welcome any ideas.
I suspect its a fault in the cpu, but it had previously been reworked, perhaps its still an electrical fault on the board.
Something is causing the circuit to remain alive. Cant think what else it could be.
Dave.
Could not work out what caused it could not locate any obvious faults, would also welcome any ideas.
I suspect its a fault in the cpu, but it had previously been reworked, perhaps its still an electrical fault on the board.
Something is causing the circuit to remain alive. Cant think what else it could be.
Dave.
05-05-05, 09:30 AM
#3
Senior Member
Join Date: Mar 2004
Location: MA/NJ
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
if i try to turn on my map light, my door ajar light come on and my clock goes off...i don't even want to go there. The map light doesn't even work. Sorry I coldn't help. Goodluck.
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
04-22-19 01:15 PM
