Don't think I need this metal line anymore, But to make sure!

Reply Subscribe

Thread Tools

Search this Thread

07-24-04, 02:14 PM

Rotaryrockstar

Epitrochoid Chamber FTW

Thread Starter

Join Date: Dec 2002

Location: Rochester, MN.

Posts: 264

Likes: 4

Received 0 Likes on 0 Posts

Don't think I need this metal line anymore, But to make sure!

I have removed whole VacRack and I have kept only the FPR and TwinScroll solenoids. This metal line runs behind the altenator and comes out where the solenoids used to be. Do I need to do anything with it? It's open on both ends right now.
Thanx!

Attached Thumbnails

Don't think I need this metal line anymore, But to make sure!-mysteryline.jpg

Reply Like

07-24-04, 02:29 PM

Sesshoumaru

Tenseiga

iTrader: (1)

Join Date: Apr 2003

Location: Iowa

Posts: 2,252

Likes: 0

Received 0 Likes on 0 Posts

dont' need it

it was used for the blow by in the stock application

if you plan on keeping the blow by it's a good line to keep.

Reply Like

07-24-04, 02:31 PM

Rotaryrockstar

Epitrochoid Chamber FTW

Thread Starter

Join Date: Dec 2002

Location: Rochester, MN.

Posts: 264

Likes: 4

Received 0 Likes on 0 Posts

blow by? Where does the end connect by the turbo normally?

Reply Like

07-24-04, 04:02 PM

Sesshoumaru

Tenseiga

iTrader: (1)

Join Date: Apr 2003

Location: Iowa

Posts: 2,252

Likes: 0

Received 0 Likes on 0 Posts

it runs to a check valve that is behind the afm on the stock intake

Reply Like

07-25-04, 05:49 PM

RETed

Lives on the Forum

Join Date: Feb 2001

Location: n

Posts: 26,664

Likes: 0

Received 16 Likes on 15 Posts

Um, that pipe is also brazed to the oil supply line to the turbo.
You really can't cut it off real nicely, and I would suggest you leave it alone.

-Ted