I would like to know if there is a way to check if the aux ports are working b/c i dont feel a kick at 5k it just keeps movin up at the same rate. Is there a full write up on how to make your own acuators.

 

Put some white grease on the actuator rods and go drive the car around hard for a bit. If the grease moves, the actuators are working, else they are not.

 

thanks will do soon, j/w should i feel a kick or anything its an 88 n/a

 

If the system is working perfectly you really should not be even able to tell that they open up. The climb under load should be smooth and even. However, in practice you more than likely should feel a little bit more "go" around 3,800 RPM or so mark.