done with 5speed swap... but...cluth issues. ( ithink)
#1
777** The Anti-rice
Thread Starter
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
done with 5speed swap... but...cluth issues. ( ithink)
The car shifts fine and all of that. But when the car is already in gear. and i press on the gas, the RPM's rise, then fall again (the clutch is totally engaged), and I accelerate. Is the clutch slipping or whats goin on, its brand new. it does this in whatever gear. the car has been in gear for a while. i decided to press on the gas, and the RPM's go up, and then down while press on the gas before it actually accelerates, and it doesnt accelerate/grab like it should. Do i need something adjusted or what?
any advice is greatly appriciated.
any advice is greatly appriciated.
#3
Banned. I got OWNED!!!
Adjust the clutch pedal per FSM specs. IT is adjusted too far in, and has preloaded the throwout bearing, applying constant release pressure.
That, or you have a screwed up clutch or oil is getting onto it.
That, or you have a screwed up clutch or oil is getting onto it.
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM