Im doing the front diff mount right now on my 88 TII. I've already searched, so i knew what i was in for.
I've got the whole exhuast off, and i've unbolted the outside mounts on the subframe, but it won't swing down.

What else needs to be unbolted from the subframe to get it to swing down so i can get to the mount?

Do i need to unbolt suspension bits, or is there some trick to get the frame off the little mounts on the outside-

 

you need to unbold the camber link. driver side of the diff. there is a bar hanging down with one bolt. undo that. keep a jack under the diff. it'll drop!

 

Jack under the Diff, or under the subframe?

 

doesn't matter... they are attached. diff is in the middle.. easier. just stick it under the diff. you might have to jack it up a bit to get the bolt out of the camber rod. as there will lots of force on it.

 

Alrighty, i'll go give it a try...

Air Tools own j00

working by yourself becuase your friends won't come and help sucks though! :shrugg:

 

Well, that helped.

Might be able to accually get this done tonight.
w00t.

once again, air tools ******* rock!

 

I'll help.

 

Haha you should come over, this thing is being a *****!

 

Yah, but not tonight. Must sleep. Just got back from driving 200 miles to help break in the new engine. Only have 400 miles left.