Dist. conversion shopping list
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Location: Connecticut
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Dist. conversion shopping list
I need a shopping list for an ignition on a carbed 13b 6port S5
I have wires, a couple sets of coils from S4na motors and a FC1000 box. What cap rotor distributer should I use, GSL-SE? Is there a better setup? Any help is appreciated.
I have wires, a couple sets of coils from S4na motors and a FC1000 box. What cap rotor distributer should I use, GSL-SE? Is there a better setup? Any help is appreciated.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Use the dizzy assembly from the 82+ RX-7. They have solid state ignitors so you don't need the resistors and associated crap. Other then that it looks like you are set. Search the 1st gen forum for "transistor trick" to get the hookup.
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Your only option for a cap and rotor is Mazda, I believe.
Run the stock advance.
You can use almost any 12A or 13B distributer, just that the 82+ models have ignitors instead of aweful points.
Run the stock advance.
You can use almost any 12A or 13B distributer, just that the 82+ models have ignitors instead of aweful points.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM