2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

DIRTY VERT with "new to me" wheels

Thread Tools
 
Search this Thread
 
Old 11-03-04, 09:55 AM
  #1  
Need an E6x

Thread Starter
 
marlaman's Avatar
 
Join Date: Aug 2001
Location: Phoenix, AZ
Posts: 842
Likes: 0
Received 0 Likes on 0 Posts
DIRTY VERT with "new to me" wheels

Yeah so if anybody out there reads my posts occasionally they know i've swapped an auto tranny for a manual one and dropped in a new engine into my vert and got her running at the biggin of october and she's almost ready to drive down to arizona --just a little more tweaking required.

I Have replaced the trunk lid on the vert because i wasn't a huge fan of the luggage rack and the lid also had some mega paint gone and i found a lid for 60 bucks shipped so i went for that and allthough it's spraypainted it's ok because i was given a 200 dollar gift certificate to a local bodyshop and that'll more than cover a repaint with brand new white paint for it, so after that happens i'll be a happy boy.

Also a few weeks ago i kissed a cub nearly head on going about 45 following 1Revvin7 in his TII because i was trying to be cool and catch up. anyway i smashed the hell out of my control arm and ruined one of my vert rims.

So i found a set of 87 sport wheels on e-bay and acquired them for about 100 bucks shipped and got new rubber and an alingment done at the local tire place--bout 400$. anyway i want your opinions on how you seem to like the wheels on the vert. i presonally think they look great--espically when they're clean. but i live in minnesota so stuff stays clean for like 2 days. Anyway i'm posting up my pics for youse guys to check out and let me know what you think about the rims.

And as for my car being dirty, yeah that's ok. it's 9:45 in the morning and i'm going back to bed before i go back to work. keeping my car clean will be a priority later in the day.

Matt

Attached Thumbnails DIRTY VERT with "new to me" wheels-side.jpg   DIRTY VERT with "new to me" wheels-rear-quarter.jpg  
Old 11-03-04, 10:26 AM
  #2  
Boosted. I got BLOWN!!!

iTrader: (29)
 
beefhole's Avatar
 
Join Date: Sep 2003
Location: Queens, NY
Posts: 3,742
Likes: 0
Received 1 Like on 1 Post
They look OK on the vert, although IMO those mesh BBS wheels do look best.
Old 11-03-04, 11:32 AM
  #3  
wtf's a piston

 
gerbraldy's Avatar
 
Join Date: Mar 2004
Location: Englewood, FL
Posts: 1,717
Likes: 0
Received 0 Likes on 0 Posts
You got yourself a nice vert, it could use a wash.
Old 11-03-04, 06:57 PM
  #4  
Senior Member

 
DAN CARWIN's Avatar
 
Join Date: Dec 2001
Location: COLORADO
Posts: 402
Likes: 0
Received 1 Like on 1 Post
look ok, but in the future put the wheels on the right, they are all oppsite
Old 11-03-04, 07:32 PM
  #5  
Mountain Rotary Mod

 
Parastie's Avatar
 
Join Date: Nov 2003
Location: Freaking Poland!!
Posts: 2,411
Likes: 0
Received 0 Likes on 0 Posts
I have the same wheels.
Old 11-03-04, 07:41 PM
  #6  
No more 7 or 8

iTrader: (3)
 
speeddemon32's Avatar
 
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
yes, and you both have them on wrong.

:-D

they should be "cutting with the rothation" not "cutting against"
Old 11-03-04, 07:42 PM
  #7  
No more 7 or 8

iTrader: (3)
 
speeddemon32's Avatar
 
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
ohhh.... and to answer the question, yes i think it looks good.
Old 11-03-04, 08:55 PM
  #8  
Senior Member

iTrader: (4)
 
BigTurbo74's Avatar
 
Join Date: Oct 2002
Location: Twin Cities, MN
Posts: 431
Likes: 0
Received 0 Likes on 0 Posts
bah! i got your other wheel caps here. come gettem!
Old 11-03-04, 09:13 PM
  #9  
kill it with BOOMSTICK!

 
Falcoms's Avatar
 
Join Date: Mar 2004
Location: McHenry, IL
Posts: 1,227
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by speeddemon32
yes, and you both have them on wrong.

:-D

they should be "cutting with the rothation" not "cutting against"
Unless you spend alot of time in reverse, they are cutting with the rotation. Remember, the top of the wheel rotates toward the direction of car travel.
Old 11-03-04, 09:26 PM
  #10  
IIMMM BBAAACCKKK!!

iTrader: (8)
 
vipers's Avatar
 
Join Date: Aug 2004
Location: redlands, cali
Posts: 2,904
Received 1 Like on 1 Post
Originally Posted by speeddemon32
yes, and you both have them on wrong.

:-D

they should be "cutting with the rothation" not "cutting against"
lol.... wrong again my chubby friend ..... they are on correctly!!! lol..... id mention the mass air flow sensor thing, but.......... you know!! ... lol.. j/k
Old 11-03-04, 09:34 PM
  #11  
ISeeWhatYou'reDoingThere

 
autopilot's Avatar
 
Join Date: Jul 2003
Location: In my house.
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by vipers
lol.... wrong again my chubby friend ..... they are on correctly!!! lol..... id mention the mass air flow sensor thing, but.......... you know!! ... lol.. j/k
Somebody break out the late 80's RX7 brochure to settle this once and for all.
Old 11-03-04, 09:39 PM
  #12  
IIMMM BBAAACCKKK!!

iTrader: (8)
 
vipers's Avatar
 
Join Date: Aug 2004
Location: redlands, cali
Posts: 2,904
Received 1 Like on 1 Post
Originally Posted by autopilot
Somebody break out the late 80's RX7 brochure to settle this once and for all.
lol.... i looked at the sticky at the top of the section! i wanted to make sure before i commented!! its the sticky that says what options came with the rx7, made by icemark..... at the bottom of the thread, there are factory pictures w/ the wheels facing the correct way
Old 11-03-04, 10:09 PM
  #13  
Rotary Powered

 
SJ_chameleon's Avatar
 
Join Date: Jun 2004
Location: Denver, CO
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
cant you only put them on one way anyway?
Old 11-03-04, 10:38 PM
  #14  
Need an E6x

Thread Starter
 
marlaman's Avatar
 
Join Date: Aug 2001
Location: Phoenix, AZ
Posts: 842
Likes: 0
Received 0 Likes on 0 Posts
i'm pretty sure theyre on the right way because on each wheel it has a R or an L on it and they each correspond to what the leters say so i'm about 100% sure they're on the right way.
Old 11-03-04, 10:40 PM
  #15  
Need an E6x

Thread Starter
 
marlaman's Avatar
 
Join Date: Aug 2001
Location: Phoenix, AZ
Posts: 842
Likes: 0
Received 0 Likes on 0 Posts
They're on the right way because the L and R correspond to the side of what car they should go on. So i'm about 100% sure i got them on correctly.
Matt
Old 11-03-04, 10:43 PM
  #16  
Tarmac Surfer

 
13b_drifter's Avatar
 
Join Date: Jul 2004
Location: Toronto
Posts: 425
Likes: 0
Received 0 Likes on 0 Posts
I would comment on the wheels if I could see them through all that damn dirt...

Looks good, man.
Old 11-03-04, 10:49 PM
  #17  
Boosted. I got BLOWN!!!

iTrader: (29)
 
beefhole's Avatar
 
Join Date: Sep 2003
Location: Queens, NY
Posts: 3,742
Likes: 0
Received 1 Like on 1 Post
Slice some bologna with those
Old 11-04-04, 12:37 AM
  #18  
Need an E6x

Thread Starter
 
marlaman's Avatar
 
Join Date: Aug 2001
Location: Phoenix, AZ
Posts: 842
Likes: 0
Received 0 Likes on 0 Posts
Sorry for my double post earlier, work computer was being hellish and i couldn't get back online after i poseted those to edit one down.


Originally Posted by beefhole
Slice some bologna with those
I buy pre-sliced bologna.

Originally Posted by 13b_drifter
I would comment on the wheels if I could see them through all that damn dirt...

Looks good, man.
Yeah i know i got her mostly washed up after my nap this morning and she's looking pretty cute now, well she was earlier, in rochester there is a shitton of construction so i'm having a hard tim ekeeping her clean for more than 1 trip to work, and paying 5 bucks per wash every day isn't worth it to me, plus i need new drivers side window weather stripping so i get my *** dripped on in an automatic wash and that sucks.
But yeah i honestly like these rims about 68% better than the BBS mesh wheels, i'm just ot a huge fan of those i guess.
Thanks for your input
Matt
Old 11-04-04, 01:30 AM
  #19  
Lets rock.

 
flamin-roids's Avatar
 
Join Date: Apr 2004
Location: SLC, Utah
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Damn you could have bought my wheels off me for that much. I have a set of S4 TII wheels and S5 GXL wheels also.
Old 11-04-04, 01:38 AM
  #20  
Rotartist

iTrader: (13)
 
RRTEC's Avatar
 
Join Date: Sep 2003
Location: Spring Hill TN 37174
Posts: 7,252
Likes: 0
Received 2 Likes on 2 Posts
Vert OEM RIMS are MUCH lighter...you just hurt your performance.... But visually they look ok.. I'd paint them black...
Old 11-04-04, 03:40 AM
  #21  
Kai
Rotorphile.

 
Kai's Avatar
 
Join Date: Mar 2002
Location: Richmond/NoVA
Posts: 1,296
Likes: 0
Received 0 Likes on 0 Posts
Not a big fan, coming from a Sport owner. I ditched those for some 'vert wheels and S5 TII wheels.

Not to insult or anything, but those are the "crappiest" five lug wheels.
Old 11-04-04, 10:20 AM
  #22  
Need an E6x

Thread Starter
 
marlaman's Avatar
 
Join Date: Aug 2001
Location: Phoenix, AZ
Posts: 842
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RRTEC
Vert OEM RIMS are MUCH lighter...you just hurt your performance.... But visually they look ok.. I'd paint them black...
That's good to know but i was working on a budget and people selling vert rims wanted a whole assload for them and i can't afford it, they may be lighter but since my car isn't a supercar anyway i don't think it matters all that much because i need something that works during college, once i get money then you can give me some better options... or you coudl always go charity style on me and get me a set of ssr's or something :-)

and i think vert rims are ugly, ESPICALLY w/o center caps.
M
Old 11-04-04, 10:25 AM
  #23  
No more 7 or 8

iTrader: (3)
 
speeddemon32's Avatar
 
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by vipers
lol.... wrong again my chubby friend ..... they are on correctly!!! lol..... id mention the mass air flow sensor thing, but.......... you know!! ... lol.. j/k


fine you skinny little SHI$% i think they look better the other way. they just look right the way they are. so screw Mazda, make them look good.


and by the way..... you have your stupid moments to....
Old 11-04-04, 10:29 AM
  #24  
Need an E6x

Thread Starter
 
marlaman's Avatar
 
Join Date: Aug 2001
Location: Phoenix, AZ
Posts: 842
Likes: 0
Received 0 Likes on 0 Posts
haha he did sorta own you with that last post--but as long as it's in good fun, i don't like wars in my threads. yeah i was thinking they look better the other way around as well but i'm way too lazy to change something so minor and as long as they work fine it's kosher for me
M
Old 11-04-04, 10:37 AM
  #25  
No more 7 or 8

iTrader: (3)
 
speeddemon32's Avatar
 
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
yeah, he is just mad because i have owned more RX-7's them him.


Quick Reply: DIRTY VERT with "new to me" wheels



All times are GMT -5. The time now is 08:28 PM.