din guage pod how to install?
03-18-04, 11:59 AM
#2
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
You got the generic right??
I have one of those aftermarket stereo install brackets that comes witht he cover plate for the hole under the stereo.. I cut holes in that and mounted my gauges in there..
you could do something similar if you have an aftermarket stero kit... just use the plate you have as trim incase you bitch up the holes.
Get creative with your bad self
I have one of those aftermarket stereo install brackets that comes witht he cover plate for the hole under the stereo.. I cut holes in that and mounted my gauges in there..
you could do something similar if you have an aftermarket stero kit... just use the plate you have as trim incase you bitch up the holes.
Get creative with your bad self
03-18-04, 12:34 PM
#3
knowledge junkie
If you mean the A-pillar pods from egauges.com, I've got those. I had them rivited on tot the A-pillar plastic interior trim with some nice flat-black colored rivits... so you can't see them.
Note if you have auto-seat belts you'll need to notch the gauge pods so the seatbelt track won't be interupted.
Note if you have auto-seat belts you'll need to notch the gauge pods so the seatbelt track won't be interupted.
03-18-04, 06:34 PM
#5
HI!
Thread Starter
Join Date: Mar 2003
Location: tatooine
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
i am looking for a complete install write up. on the DIN gauge pod that goes under or above the radio. i got mine form eguages.com and it is just a flat piece of plastic.
03-18-04, 06:46 PM
#6
HI!
Thread Starter
Join Date: Mar 2003
Location: tatooine
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
i was going to use the metra kit for the radio. here it is http://www.partsexpress.com/pe/pshow...39&PID=1111557 would it work with that kit?
Trending Topics
03-19-04, 11:15 PM
#10
Thats the same kit that crutchfield sells, You can get the "Writeup" (aka directions with wiring diagrams) from them.
www.crutchfield.com
I had that kit, it was a peice of junk. I bought a gauge/DIN holder from 1fast t2 best money I've ever spent.
www.crutchfield.com
I had that kit, it was a peice of junk. I bought a gauge/DIN holder from 1fast t2 best money I've ever spent.
03-21-04, 01:47 PM
#12
Originally posted by f1blueRx7
Thats the same kit that crutchfield sells, You can get the "Writeup" (aka directions with wiring diagrams) from them.
www.crutchfield.com
I had that kit, it was a peice of junk. I bought a gauge/DIN holder from 1fast t2 best money I've ever spent.
Thats the same kit that crutchfield sells, You can get the "Writeup" (aka directions with wiring diagrams) from them.
www.crutchfield.com
I had that kit, it was a peice of junk. I bought a gauge/DIN holder from 1fast t2 best money I've ever spent.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
