Differences in S4/S5 and NA/T2 waterpumps and housings?
#1
****** of disaster
Thread Starter
iTrader: (1)
Join Date: Aug 2001
Location: Santa Monica, CA
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
Differences in S4/S5 and NA/T2 waterpumps and housings?
So I'm looking at what to put on my 20B in terms of waterpump housings and waterpumps; is there any flow difference between the NA and T2 waterpumps of the differing years?
Originally my plan was to use the FD housing but I don't like how far forward everything ends up sitting. Ideally I'd use the S5 NA housing and pump which I have new laying around but was concerned about the flow differences.
Does a T2 pump bolt to an NA housing? I noticed the visual difference in the NA and T2 waterpump housings is an extra coolant inlet at the bottom.
Please advise!
Originally my plan was to use the FD housing but I don't like how far forward everything ends up sitting. Ideally I'd use the S5 NA housing and pump which I have new laying around but was concerned about the flow differences.
Does a T2 pump bolt to an NA housing? I noticed the visual difference in the NA and T2 waterpump housings is an extra coolant inlet at the bottom.
Please advise!
#3
The Cause of Death
S4 and S5 Fan Hubs are different, too... if that's the right word. Where the fan would get bolted on, the centering piece that goes into the fan is larger on the S5.
James
James
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM